Factory Price 1000t Three Part Gantry Type Press Machine - STX series C Frame Single Crank Mechanical Press – Daya

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for 4-8mm 304l Stainless Steel Coil, 6kg Six Axis Robot, Horixontal Type Feeder, "Making the Products and solutions of Superior Quality" may be the eternal target of our company. We make unremitting attempts to comprehend the objective of "We Will Often Preserve in Pace along with the Time".
Factory Price 1000t Three Part Gantry Type Press Machine - STX series C Frame Single Crank Mechanical Press – Daya Detail:

Main performance characteristics:

Body rigidity (deformation) 1/6000.

Use pneumatic wet clutch brake, environmental protection, no pollution, low noise, long service life.

The slider adopts two-corner six-sided guide path, and the slider guide adopts “high-frequency hardening” and “rail grinding process”: low wear, high precision, long precision retention time, and improved mold life.

The crankshaft is made of high-strength alloy material 42CrMo, which is 1.3 times stronger than 45 steel and has a longer service life.

The copper sleeve is made of tin-phosphorus bronze ZQSn10-1, whose strength is 1.5 times higher than that of ordinary BC6 brass.

The use of highly sensitive hydraulic overload protection device can effectively protect the service life of the punch and die.

Standard Japanese SMC pressure regulating valve, lubricator, air filter.

Standard Japanese NSK bearings and Japanese NOK seals.

Standard configuration of German Siemens PLC, Siemens touch screen, Siemens motor,

Optional mold cushion (air cushion).

Standard configuration

stx0

Standard configuration

Hydraulic overload protection device
Manual slider adjustment device (below ST60)
Electric slider adjusting device (above ST80)
Variable frequency variable speed motor (adjustable speed)
Mechanical mold height indicator (below ST60)
Digital mold height indicator (above ST80)
Slider and mold balance device
Rotating cam controller
Crankshaft angle indicator
Electromagnetic counter
Air source connector
Two-degree fall protection device
Air blowing device
Mechanical shockproof feet
Reserved interface for wrong delivery detection device
Maintenance tools and toolbox
Main motor reversing device
Photoelectric safety protection device
Power outlet
Electric grease lubrication device
Touch screen (pre-break, pre-load)

Optional Configuration

Pneumatic mold pad device
Foot switch
Quick die change device (die lifter, die clamper
Or mold shifter)
Upper part punching device of slider
Feeder (air, mechanical and NC)
Leveling machine
Manipulator
Mold die lighting device
Rack
Thin oil lubrication device

Advantages

1

Slide guide

Advantage 1: The slide rail adopts “high frequency quenching” and “rail grinding process”:

High frequency quenching: the hardness reaches above hrc48,

Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.

Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.

2

Worm gear

Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)

Compared with the ball seat of nodular cast iron used by general factories

Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life

3

Ball socket

Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.

Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged

4

Copper sleeve

Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers

Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time

5

Thimble

Advantage 5: Sleeve ring, ring in contact with oil seal, ring “surface grinding” + “surface chromium plating (CR)” process

Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)

Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer

6

Crankshaft

Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel

Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.

7

Tubing

Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8

Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth

8
9
10

Gear & drive shaft

Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear


Product detail pictures:

Factory Price 1000t Three Part Gantry Type Press Machine - STX series C Frame Single Crank Mechanical Press – Daya detail pictures


Related Product Guide:

With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for Factory Price 1000t Three Part Gantry Type Press Machine - STX series C Frame Single Crank Mechanical Press – Daya , The product will supply to all over the world, such as: Turin, Guyana, Iraq, Our company has abundant strength and possesses a steady and perfect sales network system. We wish we could establish sound business relationships with all customers from at home and abroad on the basis of mutual benefits.
  • The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
    5 Stars By Tyler Larson from South Korea - 2018.11.02 11:11
    The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By lucia from venezuela - 2018.02.12 14:52
    Write your message here and send it to us