High Speed Press Machine

  • Knuckle Joint High Speed Press Machine(MARX-Series)

    Knuckle Joint High Speed Press Machine(MARX-Series)

    Technical parameter Specifications Unit MARX-30T MARX-40T MARX-60T MARX-80T Press capacity Ton 30 40 60 80 Slider stroke length mm 16 20 25 30 16 20 25 30 20 25 32 40 20 25 32 40 Slider strokes per minute Spm 200-1250 200-1200 200-1050 200-900 180-1250 180-1100 180-950 180-900 100-750 100-750 100-650 100-550 120-600 120-500 120-500 120-450 Die height mm 190-240 190-240 220-300 240-320 Bolster area mm 600*400 750*500 1100*600 1500*800 Slider size mm 600*300 750*340 113...
  • High Precision High Speed Press Machine(MDH-Series)

    High Precision High Speed Press Machine(MDH-Series)

    Main performance characteristics: ® The press frame is made of international (GBT5612-2008) high-strength cast iron. After precise temperature control and tempering, the internal stress of the workpiece is naturally eliminated for a long time, so that the performance of the workpiece on the presses frame can reach the best state. ® The split gantry structure prevents the opening of the press frame when loading, and realizes the processing of high-precision products. ®The crank shaft is forg...
  • High Precision ,High Speed Press,Motor Core Lamination Press(DDH-Series)

    High Precision ,High Speed Press,Motor Core Lamination Press(DDH-Series)

    Main performance characteristics: ® The internal oil circuit of the crankshaft is designed to restrain the thermal deformation of the crankshaft. ® The press has its own special technology to control the clearance. ® Adjustable gaskets to restore equipment accuracy with minimal cost. ® The frame pull rod and slide guide are integrated, and the structure is compact and reasonable. The slide guide is guided by ball, with high precision. ® Hydraulic locking rod, the stability can be maintain...
  • 1 Point High Speed Press Machine(STS-Series)

    1 Point High Speed Press Machine(STS-Series)

    Main performance characteristics: 1.       ® The frame of the machine is made of high-strength cast iron, which is most suitable for continuous punching production because of its stable material and constant precision after internal stress relief. 2.       ®The structure of double guide pillars and one central pillar is adopted. The copper sleeve with special alloy is used to replace the traditional sliding plate structure, so that the dynamic friction is reduced to the minimum. The forced l...