High definition 85t C Type Single Crank High Speed Press Machine - Pull Down High Speed Press (HX series) – Daya

Short Description:

Product Detail

Product Tags

Feedback (2)

Dependable good quality and very good credit score standing are our principles, which will help us at a top-ranking position. Adhering towards the tenet of "quality initial, shopper supreme" for 500t Servo Press Machine, Solid Frame Servo Press, 160t Hot Die Forging Punch Machine, Good quality and aggressive prices make our products get pleasure from a significant name all around the word.

High definition 85t C Type Single Crank High Speed Press Machine - Pull Down High Speed Press (HX series) – Daya Detail:

DAYA straight side double crank punch press

VS

Other straight side double crank presses

Daya press

Daya press: with platform and safety fence, convenient for clutch maintenance and change of cooling oil, main motor belt is loose and easy to adjust, and convenient for subsequent maintenance. Safer and more convenient.

Other press

Other press: Without maintenance platform. Clutch maintenance, replacement of cooling oil, loose adjustment of main motor belt, etc. which can only be completed with the assistance of forklift, which is not convenient for subsequent repair and maintenance. There are some potential safety hazards.

Daya press

Daya press: Daya press adopts four corners and eight sides to surround the guide rail. In the stamping forming position, the slide guide rail is included by all the guide rails on the table body. This kind of guide rail has the characteristics of high stamping accuracy, strong anti eccentric load capacity, small rail wear and long precision retention time.

Other press

Other press: the guide rail with semi enclosed structure as shown in the right figure is adopted. During the stamping process, there is a section of guide rail exposed. During the stamping process, the slide guide rail is easy to tilt, with poor anti bias load capacity, large rail wear, short precision retention time and high maintenance cost.

Daya press

Daya press: the distance between the two points of force application is more than 60%;Advantages: the larger the distance between the two force application points, the greater the eccentric bearing capacity; the larger the distance between the two force application points, the higher the design cost.

Other press

Other press: the distance between the two points is generally less than 50%; Disadvantages: the smaller the distance between the two force application points, the smaller the eccentric bearing capacity. The guide rail is easy to tilt, the guide way is easy to wear, and the precision of guide rail is poor.

Daya press

Daya press: forced thin oil circulation system, energy saving, can be recycled, fan thermal performance is good, compared with grease lubrication can be increased by 5-10 beats per minute.

Other press

Other press: electric grease pump, grease can not be reused, no advantage of forced thin oil circulation system.

Daya press

Daya press: when the stroke length is the same, the forced thin oil circulation system has higher efficiency, compared with grease lubrication, it can increase 5-10 beats per minute. Strictly follow the Japanese JIS level 1 standard; the Japanese JIS level 1 standard is higher than the Taiwan CNS level 1 standard.

Other press

Other press:electric grease pump, grease can not be reused, no forced oil circulation system advantages. according to Taiwan CNS level 1 standard

Slide guide of Daya punch press

VS

Daya press

Other press

Guide rail of Daya punch press

1.High frequency quenching process: hardness above hrc48;

2. Grinding process of guide rail: the surface finish can reach ra0.4-ra0.8 (mirror surface), flatness, parallelism and verticality within 0.005mm/ ㎡.

3.The machine tool has the advantages of small wear, high precision, long precision maintenance time, long service life and low energy consumption.

Other press guide railno quenching process; milling processing, surface roughness ra1.6-ra3.2, flatness, parallelism, perpendicularity more than 0.3mm / ㎡

Daya press crankshaft

VS

other press crankshafts

Daya punch press: the crankshaft is made of high strength alloy 42CrMo Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is long, the wear resistance is good, the wear is small, and the precision is maintained for a long time.

Other presses: made of 45 steel, Disadvantages: low cost，the strength and wear resistance are not comparable to 42CrMo

Daya

Oil way of DAYA punch PRESS: Φ 8 is used for oil pressure lubrication piping.

Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth.

Other

Other presses: the oil pressure lubrication piping of press adopts Φ 6.

Product detail pictures:

Related Product Guide:

The corporation upholds the philosophy of "Be No.1 in high quality, be rooted on credit rating and trustworthiness for growth", will continue to serve outdated and new consumers from home and overseas whole-heatedly for High definition 85t C Type Single Crank High Speed Press Machine - Pull Down High Speed Press (HX series) – Daya , The product will supply to all over the world, such as: Bulgaria, Germany, Chicago, We take measure at any expense to achieve essentially the most up-to-date equipment and approaches. The packing of nominated brand is our a further distinguishing feature. The products to assure years of trouble-free service has attracted a great deal customers. The solutions are obtainable in improved designs and richer assortment, they're created scientifically of purely raw supplies. It readily available in a variety of designs and specifications for your selection. The most recent kinds are a great deal better than the preceding one particular and they are quite popular with lots of prospects.

160t Hot Stamping Press Machine For Bolts