Manufacturer of Sheet Deep Drawing Press - C Frame High Speed Press – Daya

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for 400t Servo Press Machine, Table Feeder Machine, 500t Servo Punch Machine, our products have good reputation from the world as its most competive price and our most advantage of after-sale service to the clients。
Manufacturer of Sheet Deep Drawing Press - C Frame High Speed Press – Daya Detail:

Performance characteristics

1. The frame is made of high-strength cast iron. After internal stress relief, the material is stable and the precision remains unchanged, which is most suitable for continuous stamping production;

2. Double guide rail, one center pillar structure, using zero error ball bearing to replace the traditional sliding plate structure, so as to reduce the dynamic friction to the minimum, and cooperate with forced lubrication to minimize the thermal deformation and achieve the highest accuracy;

3. The reverse side dynamic balance device is optional to reduce vibration, so that the press has the best accuracy and stability;

4. Manual mold adjustment, with mold height display and oil pressure locking device, is convenient for mold adjustment operation;

5. Man machine interface microcomputer control, numerical fault monitoring system screen display, easy to operate;

Technical parameter
Name Specifications C-25T C-45T ST-65T C-85T
Press capacity Ton 25 45 65 85
Slider stroke length mm 20 25 30 25 30 40 25 30 40 50 20 30 40 50 60
Slider strokes per minute S.P.M 200-1000 200-900 200-800 200-800 200-700 200-600 200-800 200-700 200-600 200-500 200-600 200-500 200-400 200-300 200-300
Die height mm 185-215 183-313 180-210 213-243 210-240 205-235 209-259 206-256 200-250 196-246 320-370 315-365 310-360 305-355 300-350
Slider adjustment amount mm 30 30 50 50
Bolster size mm 600*300*80 680*420 890*520*130 1000*600*140
Slider size mm 330*225 420*320 540*340 700*450
Blank-holding hole mm 100*300(400) 100*400(500) 120*460(660) 170*460(700)
Main motor HP 5 7.5 15 30
Press weight Kg 2919 5080 8016 14500
Circulatory system / Forceful automation
Speed control system / Lnverter
Clutch &Brake / Air & Friction
Auto top stop / Standard
Vibration System / (Mounting or pnenmatic Mounting ) or (Option)
NOTE:Our company is ready to carry out research and improvement work at any time. Therefore, the size design characteristics specified in this catalogue can be changed without further notice.

Advantages

1

Slide guide

Advantage 1: The slide rail adopts “high frequency quenching” and “rail grinding process”:

High frequency quenching: the hardness reaches above hrc48,

Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.

Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.

2

Worm gear

Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)

Compared with the ball seat of nodular cast iron used by general factories

Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life

3

Ball socket

Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.

Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged

4

Copper sleeve

Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers

Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time

5

Thimble

Advantage 5: Sleeve ring, ring in contact with oil seal, ring “surface grinding” + “surface chromium plating (CR)” process

Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)

Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer

6

Crankshaft

Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel

Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.

7

Tubing

Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8

Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth

8
9
10

Gear & drive shaft

Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear


Product detail pictures:

Manufacturer of Sheet Deep Drawing Press - C Frame High Speed Press – Daya detail pictures


Related Product Guide:

"Control the quality by the details, show the strength by quality". Our company has strived to establish a highly efficient and stable staff team and explored an effective quality control process for Manufacturer of Sheet Deep Drawing Press - C Frame High Speed Press – Daya , The product will supply to all over the world, such as: Frankfurt, New Delhi, Iraq, With the development of the society and economy, our company will continue the "loyalty, dedication, efficiency, innovation" spirit of enterprise, and we will always adhere to the management idea of "would rather lose gold, do not lose customers heart". We will serve the domestic and foreign businessmen with sincere dedication, and let us create bright future together with you!
  • As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Kevin Ellyson from Uruguay - 2018.09.29 13:24
    The company has rich resources, advanced machinery, experienced workers and excellent services, hope you keep improving and perfecting your products and service, wish you better!
    5 Stars By Clementine from Auckland - 2018.06.28 19:27
    Write your message here and send it to us