Toggle Joint High Speed Press (Fast series)

Short Description:


Product Detail

Product Tags

Technical parameter
Specifications Unit Fast-30T Fast-40T Fast-60T Fast-80T
Press capacity KN 300 400 600 800
Slider stroke length mm 16 20 25 30 16 20 25 30 20 25 30 40 20 25 30 40
Slider strokes per minute Spm 180-1250 180-1200 180-1050 180-900 180-1250 180-1000 180-900 180-850 180-750 180-750 180-650 180-550 180-700 180-600 180-550 180-450
Die height mm 190-240mm 190-240mm 220-300mm 220-300mm
Adjustment amount mm 50mm 50mm 80mm 80mm
Slide area mm 600*300mm 750*340mm 1030*500mm 1496*650mm
Bolster area mm 600*400mm 750*500mm 1100*600mm 1500*750mm
Thickness mm 90mm 120mm 140mm 140mm
Hole size mm 400*100mm 560*120mm 840*120mm 1240*120mm
Feed material hole size mm 350*60mm 500*100mm 800*115mm 1200*115mm
Main motor Kw 11*4P 15*4P 22*4P 37*4P
Total weight Kg 6500Kg 8000Kg 14000Kg 21000Kg

Advantages

1

Slide guide

Advantage 1: The slide rail adopts "high frequency quenching" and "rail grinding process":

High frequency quenching: the hardness reaches above hrc48,

Rail grinding process: the surface finish can reach Ra0.4, the flatness is as high as 0.01mm/m2, which is generally 03mm / m2.

Advantages: small wear, high precision, long time to maintain precision and improve the service life of the die.

2

Worm gear

Advantage 2: Turbine with high adjustment of slide die adopts high strength copper alloy material: Tin Phosphorus Bronze (zqsn10-1)

Compared with the ball seat of nodular cast iron used by general factories

Advantages: the strength and wear resistance are improved correspondingly. The probability of seizure is greatly reduced in the process of die adjustment, Extended service life

3

Ball socket

Advantage 3: Ball seat material: sintered TM-3 copper alloy ball seat, ball socket of general manufacturer is nodular cast iron.

Advantages: the high-strength TM-3 copper alloy ball seat has a surface compressive strength of 1000kgf / C m2. In the process of stamping, the probability of seizure is greatly reduced and the service life is prolonged

4

Copper sleeve

Advantage 4: All copper sleeves of punch press are made of Tin Phosphorus Bronze zqsn10-1, and bc6 (zqsn 6-6-3) copper material is used by general manufacturers

Advantages: the strength is 1.5 times higher than that of bc6 copper, with high strength, small wear and long precision retention time

5

Thimble

Advantage 5: Sleeve ring, ring in contact with oil seal, ring "surface grinding" + "surface chromium plating (CR)" process

Advantages: the surface finish is between Ra0.4 and Ra0.8, it is not easy to leak oil when contacting with oil seal, and the surface is chromium plated (CR)

Process, hardness as high as hrc48 degrees, to ensure long-term use does not wear, oil seal service life is longer

6

Crankshaft

Advantage 6: The crankshaft is made of high strength alloy 42CrMo, and the crankshaft of general manufacturers is made of 45 steel

Advantages: the strength is 1.3 times higher than that of 45 steel, the service life is longer, and the probability of breaking crankshaft is greatly reduced (strictly through forging, heat treatment, flaw detection, processing, inspection, etc.) to ensure All kinds of quality problems in the production process of crankshaft are avoided to ensure the quality of crankshaft.

7

Tubing

Advantage 7: The standard machine open single point and open double point crank punch press, the standard oil pressure lubrication piping adopts Φ 6 (other manufacturers generally adopt Φ 4), medium and large punch press oil pressure lubrication pipe adopts Φ 8

Advantages: long pipeline, large diameter is not easy to block, break, ensure the safety of lubricating oil, smooth

8
9
10

Gear & drive shaft

Advantage 8: The gear shaft adopts high frequency quenching process to ensure long service life without wear and tear


  • Previous:
  • Next:

  • Write your message here and send it to us